滑石粉/石墨粉/重晶石粉-德固企業股份有限公司

產品

NOVABRITE耐化矽(Silica powder)

電洽

1.在耐磨橡膠製品中的應用:
Application in wear-resistant rubber products:
 
橡膠板,管,帶,輥,製品中要求混鍊膠應具有很好的滲透性和較強的粘結性,填充矽微粉的混鍊膠充分表現了膠料滲透性,粘結性及分散性良好等獨特性能,且利於在帆布上的擦塗及增強膠片與帆布之間的粘著強度,扯斷強度  ,永久變形等機械性能均有明顯改善並增強耐磨性.
Rubber plate, tube, belt, roller, products require mixing glue should have a good permeability and strong adhesion, filled with silica powder mixing glue fully reflects the glue permeability, adhesion and dispersion of good and other unique properties, and conducive to the painting on the canvas and enhance the adhesion between the film and canvas, The mechanical properties such as breaking strength and permanent deformation are obviously improved and the wear resistance is enhanced.

2.在矽橡膠製品中的應用:
Application in silicone rubber Products:

 
低含水量,優良的絕緣性,特殊晶象,粒度小並具有一定的補強性能.
Low water content, excellent insulation, special crystal image, small granularity and have a certain degree of reinforcement performance.

3.適用添加於製造戶外塗料:
Applicable to the manufacture of outdoor coatings:
如屋頂 , 戶外木器和外牆塗料 , 可控制溫度和氣體透過率 , 降低光透射到塗膜內部 , 使塗料不易褪色 , 耐候性和耐降解性高 , 具消光作用,能提高塗膜的光滑性 . 亦可應用於溶劑型塗料 , 水性建築塗料 , 工業底漆和麵漆以及粉末塗料 , 易分散在水性與溶劑型及無溶劑型塗料中 . 用於環氧富鋅底漆 , 易隨著塗料的流動而排列定向,使其在幹膜中和基面平行 , 這樣形成的物理遮罩層可以阻礙濕氣的透過提高塗膜的耐水性和耐濕性 .
Such as roofs, outdoor wood and exterior wall coatings, can control temperature and gas transmittance, reduce light transmission to the inside of the coating film, so that the coating is not easy to fade, weatherability and high degradation resistance, with matting property, can improve the smoothness of the coating film. can also be used in solvent-based coatings, waterborne architectural coatings, industrial primer and topcoat and powder coatings, easy to disperse in water-based and solvent-based and solvent-free coatings. Used for epoxy zinc-rich primer, easy to arrange with the flow of paint, so that it is parallel to the base surface in the dry film, so the formation of physical shielding layer can hinder the moisture through the improvement of the coating water resistance and moisture resistance.


(Spatula rub out method for Oil Adsorption )
Grade /Particle Size Average(D50)µm Top cut(D97)µm Oil absorption(%)
NB-5125B 10.0 20.0 17 ~ 20 %
NB-5207B 7.0 15.0 17 ~ 20 %
NB-5369B 5.0 10.0 20 ~ 23 %